// tag
Last time we left off with a pretty decent understanding about how our router is structured and what components were used. We also found two interesting debug pads that showed oscillating voltages
Read entryThis is a write-up for solving the devils-swapper RE challenge. It was mostly intended for my personal archive, but since it may be interesting to all of you. This especially
Read entryIt has been a while since I did some hardware hacking, and this time I want to review the basics. The LinkSys EA6100 router intrigued me since I was only able to
Read entryWelcome back to part 2.2 of this series! If you have not yet checked out part 1 or part 2.1, please do so first as they highlight important reconnaissance steps
Read entryWelcome back to part 2 of this series! If you have not checked out part 1 yet, please do so first, as it highlights important reconnaissance steps! So let us dive right
Read entryRecently, we came across some firmware samples from D-Link routers that we were unable to unpack properly. Luckily, we got our hands on an older, cheaper but similar device (DIR882) that
Read entryNote: This is a re-upload of an old write-up. This is another write-up from an interesting little challenge. The original forum post about it can be found here. To
Read entryNote: Re-write/Re-upload due to dead links This write up are my thoughts and steps to statically analyze a given unknown binary. I want to understand the binary to a
Read entryNote: Re-upload due to dead links :) Yo! Life kept me more than busy, but now I've got a little more time on my hands. I decided to do a
Read entryPreface Hi folks! For quite some time there was no article from my side. Life kept me busy with all sorts of things, but here is a little something until some cooler
Read entry
