// tag
Disclaimer: These are unfiltered study notes mostly for myself. Guaranteed not to be error free. So if you did land here, managed to get to the end of it and found some
Read entryLast time we left off with a pretty decent understanding about how our router is structured and what components were used. We also found two interesting debug pads that showed oscillating voltages
Read entryIt has been a while since I did some hardware hacking, and this time I want to review the basics. The LinkSys EA6100 router intrigued me since I was only able to
Read entryWelcome back to part 2.2 of this series! If you have not yet checked out part 1 or part 2.1, please do so first as they highlight important reconnaissance steps
Read entryWelcome back to part 2 of this series! If you have not checked out part 1 yet, please do so first, as it highlights important reconnaissance steps! So let us dive right
Read entryRecently, we came across some firmware samples from D-Link routers that we were unable to unpack properly. Luckily, we got our hands on an older, cheaper but similar device (DIR882) that
Read entryPreface Note: As always the following is just a digest of all the things I could observe by working on printers myself or facts from stuff I read about recently. Since this
Read entry
